MaxAmps.com is proud to offer the ultimate Hard Case ARTR Kit for the increasingly popular 1/8 Scale Electric Conversions. Voltage under load is critical in 1/8 scale vehicles like the Losi 8ight-E, Associated RC8e and SC8e. This pack will deliver higher voltage under load than any other pack we've tested.
Kit comes with one Hard Case 5250HC 14.8V lipo pack, Hyperion EOS0720iNET3 DC Balance Charger, and a Lipo Sack. Deans Ultra connectors are installed on the pack and charger so that you're ready to plug and play.
This pack will make your 1/8 scale brushless scream! If you're looking for an insane amount of power, this is the pack for you!
Kit Includes:
Hard Case Lipo 5250HC 4S 14.8V Pack
Hard Outer Case
5250mah Capacity
14.8 Volts
139mm X 47mm X 39mm
500 grams
5C Fast Charge Capable
Water-sealed for all-weather protection
Built today with factory fresh cells
We add the connectors and balancing taps for you
Money Back Guarantee
Comes with 12awg Deans Ultra Female Plug
Hyperion EOS0720iNET3 DC Balance Charger
NEW! Now includes Lipo and LiFePO4/A123 Cycle mode.
- Ultimate charger for speed charging your Lipo or Life packs up to 20A max charge rate.
- Charges NIMH, NICD, Lipo, LiFePO4/A123 & Lead Acid
- 1-16 NIMH-NICD, 1-7 Lipo, 1-7 LiFePO4/A123, 1-12 Lead Acid cells
- Up to 20 amp charge rate
- 250 Watt max charge output
- 11-28V DC only (needs a separate power supply)
- Capable of quick 2C lipo charge rate
- Comes with built-in Dataport and supplied USB cable
- Comes with Integrated LBA Balancer
- Also includes Hyperion 0720i 2S-7S Multi-Adapter
- Comes with Deans Ultra Male Plug
This charger is incredibly versatile and has 8 available modes!
- Charge only mode
- Balance Charge mode
- Balance only mode
- Discharge mode(80W per port w/ 10A max current)
- Lipo & LiFePO4/A123 Storage mode(Allows fast and simple discharge to 60% capacity for proper storage voltage which equals longer battery life)
You may "Network" connect two EOS0720i's together, using optional EOS0610i network cable. In this case, you can charge two separate but similar Lipo or LiFePO4/A123 packs as a single unit, to make packs from 4S to 14S at 500W max charge power.
This charger is carefully designed with many built-in safety features such as reverse polarity protection, input voltage error warning, and cell count mismatch warnings for lithium chemistry batteries.
Terminal Capacity Selection (TCS)
Temperature Sensor Port
20 User-definable Memory Positions
Lipo Sack
Fire resistant Lipo Sack 9" X 12"
Use this product while charging, storing or transporting a lipo battery pack. The use of a Lipo Sack does not guarantee protection of surrounding surfaces. It is simply intended to mitigate the effects of a battery failure during charging or after a crash. MaxAmps takes no responsiblilty for effectiveness of the lipo sack. Never charge unattended. Always keep your lipo packs in a fireproof container in addition to the lipo sack.
