ROAR APPROVED. MaxAmps.com presents the ultimate "Sanction Spec" 1/8 scale Hard Case RTR Kit. As you racers know, the most important factor for your batteries is voltage under load. This lipo pack boasts a 60C rating for all your amp hungry setups. It will maintain higher voltage under load than any other lipo battery pack we've tested. Plus, you'll have no problem getting plenty of runtime with an industry leading 6500mah of capacity.
Kit comes with one Hard Case 6500SS 14.8V lipo pack, Hyperion EOS0720iNET3 DC Balance Charger, 45A Switching Power Supply, and a Lipo Sack. Deans Ultra connectors are installed on the pack and charger so that you're ready to plug and play.
This pack will make your 1/8 scale brushless scream! If you're looking for an insane amount of power, this is the pack for you!
Perfect lipo battery pack for Losi 8ight-E. Associated RC8-E, SC8-E. HPI Vorza Flux. Hot Bodies VE8. OFNA Hyper 9E, Ultra LX-1E.
Kit Includes:
Hard Case Lipo 6500SS 4S 14.8V Pack
Hard Outer Case
6500mah Capacity
14.8 Volts
139mm X 47mm X 51.5mm
676 grams
Water-sealed for all-weather protection
Comes standard with Hyperion taps
Comes standard with 12awg Deans Ultra wire
Highest performance in the industry
Twice the capacity of NiMH for the same weight
Plug and Play for any charger/balancer/vehicle
We add the connectors and balancing taps for you
Money Back Guarantee
Normally ships within 24-48 hours
Exceeds safety standards of the IATA
Built today with factory fresh cells
Can be recharged unlimited times per day
Copper Tab Cells for lower resistance
Comes with 12awg Deans Ultra Female Plug
Hyperion EOS0720iNET3 DC Balance Charger
NEW! Now includes Lipo and LiFePO4/A123 Cycle mode.
- Ultimate charger for speed charging your Lipo or Life packs up to 20A max charge rate.
- Charges NIMH, NICD, Lipo, LiFePO4/A123 & Lead Acid
- 1-16 NIMH-NICD, 1-7 Lipo, 1-7 LiFePO4/A123, 1-12 Lead Acid cells
- Up to 20 amp charge rate
- 250 Watt max charge output
- 11-28V DC only (needs a separate power supply)
- Capable of quick 2C lipo charge rate
- Comes with built-in Dataport and supplied USB cable
- Comes with Integrated LBA Balancer
- Also includes Hyperion 0720i 2S-7S Multi-Adapter
- Comes with Deans Ultra Male Plug
This charger is incredibly versatile and has 8 available modes!
- Charge only mode
- Balance Charge mode
- Balance only mode
- Discharge mode(80W per port w/ 10A max current)
- Lipo & LiFePO4/A123 Storage mode(Allows fast and simple discharge to 60% capacity for proper storage voltage which equals longer battery life)
You may "Network" connect two EOS0720i's together, using optional EOS0610i network cable. In this case, you can charge two separate but similar Lipo or LiFePO4/A123 packs as a single unit, to make packs from 4S to 14S at 500W max charge power.
This charger is carefully designed with many built-in safety features such as reverse polarity protection, input voltage error warning, and cell count mismatch warnings for lithium chemistry batteries.
Terminal Capacity Selection (TCS)
Temperature Sensor Port
20 User-definable Memory Positions
45A Switching Power Supply
- 9-15V DC Output Voltage
- 32A Continuous Output Current
- 45A Max Output Current
- 225 x 225 x 118mm dimensions
- 6.2 lbs or 2.8 Kg
- Short circuit and over-voltage protection
- Binding post output terminals
- Advanced switch-mode technology
- External fuse access
- Heavy duty metal cabinet
Lipo Sack
Fire resistant Lipo Sack 9" X 12"
Use this product while charging, storing or transporting a lipo battery pack. The use of a Lipo Sack does not guarantee protection of surrounding surfaces. It is simply intended to mitigate the effects of a battery failure during charging or after a crash. MaxAmps takes no responsiblilty for effectiveness of the lipo sack. Never charge unattended. Always keep your lipo packs in a fireproof container in addition to the lipo sack.
